Intelligent headlight control (IHC) system

Page 102

Intelligence high beam system

The vehicle will automatically switch between high and low beams according to the driving environment, after the intelligence high beam system is enabled.

Activate and deactivate the intelligence high beam system The intelligence high beam system can be activated or deactivated via the central console display. When the headlight switch is set to AUTO mode and the low beams are on, pulling the light and wiper control lever towards the steering wheel for 2 seconds will activate or deactivate the intelligence high beam system. How to use the Intelligence high beam system 1. Activate the intelligence high beam system. 2. After enabling AUTO mode for the headlights via the central console display and the low beams are automatically turned on, the intelligence high beam system will be ready for operation, indicated by the instrument panel light . The vehicle will automatically switch between high and low beams based on the driving environment, with the corresponding indicator lamp on the instrument panel.

NOTE (Cont'd)

◆ The automatic lamp on/off function may not be activated in the haze environment, so please manually turn on the lamps in this case. ◆ When the headlamps/position lamps are on and the vehicle enters the Rest Mode/ Theater Mode, the headlamps/position lamps will go off automatically. When the vehicle exits the Rest Mode/Theater Mode, the headlamps/position lamps will turn on. Under the Rest Mode/Theater Mode, you can restore the exterior lights via the light/wiper control lever.

◆ When temporarily driving into an area with different traffic directions (e.g., driving in a right-traffic area and then entering a left-traffic area), the intelligent headlight system will continue to function normally without the need for manual headlamp adjustment by the driver.

System limitations The intelligence high beam system may not work normally under the following circumstances (not exclusive):

◇ The vehicle speed is low.

◇ The fog lamps are turned on.

◇ The wipers are enabled to the HI position and work continuously for a while. ◇ The driving environment is bright.

◇ Under intense driving conditions (e.g. emergency braking and sharp turns). ◇ The turn signal lamp is turned on.

Page 103

◇ There is a highly reflective object on a low-lit street.

◇ The vehicle encounters pedestrians or bicycles on a road with poor lighting.

◇ The light of the oncoming vehicle is blocked (e.g. a crash barrier, a high central road fence, and a green belt).

◇ The brightness of the tail lamps of the lead vehicle is low or does not comply with national standards when the vehicle is following the lead vehicle.

◇ The vehicle travels on a road with sharp turns, a mountain road, or an uneven road.

◇ The vehicle travels on a slope or a bumpy road.

◇ The vehicle travels in extreme weather, such as heavy rains, snow, and fog.

◇ System failure.

WARNING

◆ The intelligence high beam system is

a driver assistance function, which can help you select the lighting best suitable for the actual condition.

◆ The driver shall always be responsible for manual switching between the high and low beams under traffic and environmental conditions.

CAUTION

◆ The intelligence high beam may not be

able to correctly identify all driving environments and cannot work normally in some environments.

CAUTION (Cont'd)

◆ If the camera is blocked by dirt, stickers, ice, or snow, the intelligence high beam may not work.

◆ If the vehicle lighting system is changed (e.g. the headlamp is modified), the intelligence high beam performance may be degraded or the function may not be available.

NOTE

◆ In the case of oncoming non-motor vehicles such as bicycles and electric bicycles, the intelligence high beam system shall be turned off in time to prevent dazzling.

◆ The high beam and high beam flash functions can be manually turned on or off at any time.

◆ You will exit the intelligence high beam system, after manually turning on the high beam or headlamp flash function.

◆ You will exit the intelligence high beam system, after disabling the automatic headlamp function.