AUTO HOLD

Page 98

CAUTION

◆ Improper operation or modifications (such as modifications to the brake system, wheels, tires and other components) of the vehicle will affect the function of ESC and ABS.

◆ Improper operation or modifications (such as modifications to the brake system, wheels, tires and other components) of the vehicle will affect the function of ESC and ABS.

◆ Tires of specified specifications and size must be used. If the tire size is incorrect, or the size of the tires is inconsistent, the ABS may not function.

◆ When the instrument has an alarm related to the HDC system, you need to pay attention to safe driving. If you need to restore the function, you need to stop until the brake temperature cools.

NOTE

◆ In case of failure in ABS, the normal braking system can still work normally, but braking characteristics have changed.

◆ In some special working conditions such as a long slope, the HDC function may be temporarily unavailable due to high brake temperature.

Acoustic vehicle alerting system of electric vehicle running at low speed

During driving at low speed, the acoustic vehicle alerting system sounds the warning chime to warn pedestrians and vehicles to improve driving safety.

Acoustic vehicle alerting system alarm

The system sounds the warning chime when the vehicle runs forward at the speed of not more than 25 km/h. The vehicle also emits a warning sound when reversing.

Page 99

AUTO HOLD

AUTO HOLD can help you keep the vehicle stationary after the braking, without the need of setting the gear lever to "N"/"P" position or apply the parking brake. When you need to drive again, just depress the accelerator pedal.

AUTO HOLD activation conditions

When the following conditions are met, AUTO HOLD can be activated:

◇ The vehicle has been started.

◇ The driver has fastened the seat belt.

◇ All doors have been closed.

◇ The vehicle is stationary.

Activating and deactivating AUTO HOLD

After meeting the conditions for Auto Hold activation, you can enable or disable the Auto Hold function by accessing the "My Car" chassis power interface on the central console display via the button, and taping the Auto Hold soft key. Once the function is activated, the indicator lamp below the Auto Hold soft key will illuminate.

Use of AUTO HOLD

With AUTO HOLD activated, after braking through depressing the brake pedal deeply, the indicator lamp in the instrument panel will come on, indicating that the AUTO HOLD function is working. At this time, if the brake pedal is released, the vehicle will remain stationary, and after the accelerator pedal is depressed, the vehicle will drive.

CAUTION

◆ When driving into a mechanism such as a vehicle washing device that transports the vehicle with a conveyor belt, be sure to deactivate the AUTO HOLD function.

NOTE

◆ When the Auto Hold function is active, opening the driver's door or unfastening the driver's seatbelt will deactivate the Auto Hold function. ◆ When the Auto Hold function is active, applying the electronic parking brake (EPB) manually, the Auto Hold function will be deactivated. ◆ After stopping the vehicle with the Auto Hold function enabled, if the brake pedal is not pressed firmly, the Auto Hold function will not activate. ◆ Once the Auto Hold function is activated, pressing the brake pedal again or pressing the accelerator pedal will deactivate the Auto Hold function.